The machining of fine parts or parts, such as bearings, etc. will produce embroidered corrosion due to improper storage conditions or rust prevention, which can not be treated by mechanical method at all, while the accuracy of parts will be damaged by chemical pickling. According to many years of processing experience, hisoder technology has summed up some methods of derusting, which will not damage the workpiece, change the parts or be corroded. Rework or repair high precision parts. Because of the floating rust on the surface of parts caused by improper storage or transportation, the use of colleen-306 can remove the floating rust perfectly and ensure the original accuracy;
1、 Immersion cleaning process
1. Take the professional cleaning solution into the tank (preferably plastic or stainless steel tank, which can reduce the penetration of iron ions into the solution and reduce the service life);
2. Use electric heater to heat to 40-50 ℃ and keep it, and the normal temperature can only need to extend the time;
3 immerse the hardware processing parts into the tank;
4 if the power needs to be further improved, the circulating pump can be increased to mix the tank liquid;
5. Take out the workpiece after the rust is completely dissolved, and rinse it with water-based rust inhibitor;
6. After rinsing, it is naturally dry or dried, or dehydrated and antirust directly;
7. When required, carry out overall rust prevention and transfer to the next process.
2、 Wipe cleaning process
1. Wipe it repeatedly with a rag, which is suitable for cleaning and derusting of large equipment or workpieces;
2. After wiping, dry with hot air or dry naturally, and then apply antirust oil.
What is the most important parameter in CNC machining of Jiangmen?
We usually do CNC, no matter which programming software you use, no matter which version you use, in the final analysis, we are setting the following parameters.1: The cutting depth is the cutting dep
Cleaning steps of lubricating device of CNC milling machine
Many parts of the lubricating device of CNC milling machine need to be cleaned regularly. The specific cleaning methods are as follows. (1) Cleaning method of oil rope and felt. Oil rope and linole
How to choose the right cutting tool for Jiangmen CNC machining
How to select cutting tools reasonably in Jiangmen CNC machining The selection of cutting tools is carried out under the condition of human-computer interaction of NC programming. The tool and hand
What are the rust removal methods of Jiangmen CNC machining precision parts
The machining of fine parts or parts, such as bearings, etc. will produce embroidered corrosion due to improper storage conditions or rust prevention, which can not be treated by mechanical method at